2 1/4" x 3/4" Red Oak Select & Better Rift Sawn Only 5' to 10' Unfinished Solid Hardwood Flooring
Product Specifications
- ConstructionSolid Hardwood Flooring
- Species Red Oak
- GradeSelect & Better
- Width2 1/4"
- Thickness3/4"
- Length5' to 10' Random Lengths
- Edge ProfileSquare Edge
- Milling ProfileTongue & Groove
- Kiln Dried Yes
- Installation MethodsNail or Staple Down
Description
"This 2 1/4"" Red Oak Select & Better Rift Sawn Only 5' to 10' hardwood flooring will have very consistent color and grain throughout. Select & Better grade will also be mostly free of imperfections such as knots and minerals streaks and provide an overall clean appearance. Our 3/4"" thick unfinished solid wood flooring is precision milled by NWFA standards or better and has a 4 sided tongue and groove for ease of installation.
Rift Sawn Only - This sawing method produces a unique grain pattern while also increasing stability and hardness. Rift Sawn boards will have a very tight and straight grained appearance. Due to its increased stability, this flooring is a great choice when installed over approved radiant heat systems.
"Please note: If you need an amount less than the minimum order, we can still provide this to you but you may incur a pallet break fee. Please call for details.
Coverage Needed:
Flooring Total: $0.00
Est. Shipping Cost: $0.00
Total: $0.00
ACCESSORIES
Please view the matching accessories for your new flooring. | FREE SHIPPING on all Transition Pieces & Underlayment with flooring order.
Transitions
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 |
Quarter Round Red Oak Rift Only Unfinshed | 96" Long Piece – Quarter Round trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $16.80 | ||
 |
Shoe Molding Red Oak Rift Only Unfinshed | 96" Long Piece – Shoe Molding trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $15.20 | ||
 |
Cove Molding Red Oak Rift Only Unfinshed | 84" Long Piece – Cove molding is used to trim the seam where a stair tread and riser meet. | $18.80 | ||
 |
T-molding Red Oak Rift Only Unfinshed | 78" Long Piece – T-molding transitions to another hard surface floor of the same or similar height such as tile or marble. | $38.25 | ||
 |
Threshold Red Oak Rift Only Unfinshed | 78" Long Piece – Threshold transitions to carpet or exterior doors such as front, rear or garage entry doors, sliding glass doors and french doors. | $38.25 | ||
 |
Reducer Red Oak Rift Only Unfinshed | 78" Long Piece – Reducer transitions to subfloor or thinner floors such as linoleum or vinyl. | $38.25 | ||
 |
3 1/2" Stair Nose Red Oak Rift Only Unfinshed | 3 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $48.35 | ||
 |
5 1/2" Stair Nose Red Oak Rift Only Unfinshed | 5 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $66.10 |
Installation Accessories
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 |
Multi-purpose Floor Protector | 150 Square Foot Roll - can be used on all types of flooring including: hardwood, vinyl, carpet, tile, stairs or even countertops. Heavy duty, non-slip, non-tear and re-useable at least 3 more times. Ideal to protect your flooring during remodeling or new construction. Includes a breathable, waterproof polyester film. Light adhesive backing makes sure it stays in place on those busy jobsites. |
$59.00 | ||
 |
Silicone Vapor Shield - Moisture Retarder | 200 Square Foot Roll - Necessary for installation of staple or nail down floors. Meets NWFA requirements for moisture retarder. Prevents squeaking and allows planks to slide easily for installation. | $39.00 |