5" x 3/4" Red Oak #3 Common Unfinished Solid Hardwood Flooring
Product Specifications
- ConstructionSolid Hardwood Flooring
- Species Red Oak
- Grade#3 Common
- Width5"
- Thickness3/4"
- Length10" - 60" Random Lengths
- Edge ProfileSquare Edge
- FeaturesNo
- Kiln Dried Yes
- Installation MethodsNail or Staple Down
Description
This 5" x 3/4" Red Oak #3 Common flooring is for budget purchases and acceptance of a rustic look. Please refer to the picture provided of an installed, sanded and coated #3 common floor. These are good looking floors when finished and last as long as any other ¾” solid floor. #3 common flooring is too good for the mill to discard but you must know that this grade allows for some split and cracked wood, some open knots, broken or missing tongues and some milling defects. This grade will have a majority shorter lengths with some possibly longer. These defects can be dealt with by rejecting some boards and cutting off the ends of others. Also, boards with broken tongues can be installed and the same with split boards. Then the finisher has to fill and sand and fill and sand until the floor is solid and ready to coat. These floors call for an experienced installer/sander finisher. The usable percentage of flooring depends on individual taste and installer know how. There are no returns or refunds with this product.
Coverage Needed:
Flooring Total: $0.00
Shipping Cost: $0.00
Total: $0.00
ACCESSORIES
Please view the matching accessories for your new flooring. | FREE SHIPPING on all Transition Pieces & Underlayment with flooring order.
Stair Treads and Risers
| Image | Description | Select Options | Price | QTY | Action |
|---|---|---|---|---|---|
 | Stair Treads "Red Oak" - Dimensions are 1" thick and 11 1/2" deep with bull nose on front edge. Select lengths and return(s) if needed. Returns are required when the stair case is open on the left or right. At the bottom looking up, if it is open on the left side, treads will need a left return. Call for custom sizes. | $42.00- $171.00 | |||
 | Stair Risers "Red Oak" - Dimensions are 3/4" thick and 7 1/2" tall. Length selections from 36" to 94". Covers the vertical space between steps. Call for custom sizes. | $27.00- $117.00 |
Transitions
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 | Quarter Round - Red Oak Unfinished | 94" Long Piece – Quarter Round trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $14.50 | ||
 | Shoe Molding - Red Oak Unfinished | 78" Long Piece – Shoe Molding trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $14.50 | ||
 | Cove Molding - Red Oak Unfinished | 84" Long Piece – Cove molding is used to trim the seam where a stair tread and riser meet. | $14.50 | ||
 | T-molding - Red Oak Unfinished | 78" Long Piece – T-molding transitions to another hard surface floor of the same or similar height such as tile or marble. | $32.00 | ||
 | Threshold - Red Oak Unfinished | 78" Long Piece – Threshold transitions to carpet or exterior doors such as front, rear or garage entry doors, sliding glass doors and french doors. | $32.00 | ||
 | Reducer - Red Oak Unfinished | 78" Long Piece – Reducer transitions to subfloor or thinner floors such as linoleum or vinyl. | $32.00 | ||
 | 3 1/2" Stair Nose - Red Oak Unfinished | 3 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $49.50 | ||
 | 5 1/2" Stair Nose - Red Oak Unfinished | 5 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $59.50 |
Installation Accessories
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 | Silicone Vapor Shield - Moisture Retarder | 200 Square Foot Roll - Necessary for installation of staple or nail down floors. Meets NWFA requirements for moisture retarder. Prevents squeaking and allows planks to slide easily for installation. | $39.00 |