7" x 3/4" White Oak Select & Better Rift & Quartered 2' to 10' Unfinished Solid Hardwood Flooring
Product Specifications
- ConstructionSolid Hardwood Flooring
- SpeciesWhite Oak
- GradeSelect & Better
- Width7"
- Thickness3/4"
- Length2' to 10' Random Lengths
- Edge ProfileSquare Edge
- Milling ProfileTongue & Groove
- Kiln Dried Yes
- Installation MethodsNail or Staple Down
Description
This 7" White Oak Select & Better Rift & Quartered 2' to 10' hardwood flooring will have very consistent color and grain throughout. Select & Better grade will also be mostly free of imperfections such as knots and minerals streaks and provide an overall clean appearance. Our 3/4" thick unfinished solid wood flooring is precision milled by NWFA standards or better and has a 4 sided tongue and groove for ease of installation.
Rift & Quartered - This sawing method produces a unique grain pattern while also increasing hardness and stability to minimize expansion and contraction. Rift Sawn boards display very tight, straight grain, while Quarter Sawn boards display the prominent "ribbon & flake" pattern they are desired for, as well as tight grain. Due to its increased stability, this flooring is a great choice when installed over approved radiant heat systems.
Please note: If you need an amount less than the minimum order, we can still provide this to you but you may incur a pallet break fee. Please call for details.
Coverage Needed:
Flooring Total: $0.00
Est. Shipping Cost: $0.00
Total: $0.00
ACCESSORIES
Please view the matching accessories for your new flooring. | FREE SHIPPING on all Transition Pieces & Underlayment with flooring order.
Stair Treads and Risers
| Image | Description | Select Options | Price | QTY | Action |
|---|---|---|---|---|---|
 | Stair Treads "White Oak Rift & Quartered" - Dimensions are 1" thick and 11 1/2" deep with bull nose on front edge. Select lengths and return(s) if needed. Returns are required when the stair case is open on the left or right. At the bottom looking up, if it is open on the left side, treads will need a left return. Call for custom sizes. | $86.50- $290.00 | |||
 | Stair Risers "White Oak Rift & Quartered" - Dimensions are 3/4" thick and 7 1/2" tall. Length selections from 36" to 96". Covers the vertical space between steps. Call for custom sizes. | $50.00- $158.00 |
Transitions
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 | Quarter Round White Oak Rift and Quartered Unfinshed | 94" Long Piece – Quarter Round trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $19.50 | ||
 | Shoe Molding White Oak Rift and Quartered Unfinshed | 94" Long Piece – Shoe Molding trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $19.50 | ||
 | Cove Molding White Oak Rift and Quartered Unfinshed | 84" Long Piece – Cove molding is used to trim the seam where a stair tread and riser meet. | $19.50 | ||
 | T-molding White Oak Rift and Quartered Unfinshed | 78" Long Piece – T-molding transitions to another hard surface floor of the same or similar height such as tile or marble. | $44.00 | ||
 | Threshold White Oak Rift and Quartered Unfinshed | 78" Long Piece – Threshold transitions to carpet or exterior doors such as front, rear or garage entry doors, sliding glass doors and french doors. | $44.00 | ||
 | Reducer White Oak Rift and Quartered Unfinshed | 78" Long Piece – Reducer transitions to subfloor or thinner floors such as linoleum or vinyl. | $44.00 | ||
 | 3 1/2" Stair Nose White Oak Rift and Quartered Unfinshed | 3 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $78.50 | ||
 | 5 1/2" Stair Nose White Oak Rift and Quartered Unfinshed | 5 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $98.50 | ||
 | 3 1/2" x 94" Stair Nose - White Oak Unfinished | 3 ½" Wide x 94" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $69.50 | ||
 | 5 1/2" x 94" Stair Nose - White Oak Unfinished | 5 ½" Wide x 94" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $86.50 |
Installation Accessories
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 | Silicone Vapor Shield - Moisture Retarder | 200 Square Foot Roll - Necessary for installation of staple or nail down floors. Meets NWFA requirements for moisture retarder. Prevents squeaking and allows planks to slide easily for installation. | $39.00 |