6" x 3/4" Walnut #2 Common Unfinished Solid Hardwood Flooring
Product Specifications
- ConstructionSolid Hardwood Flooring
- SpeciesWalnut
- Grade#2 Common
- Width6"
- Thickness3/4"
- Length12" - 60" w/ Possible Longer
- Edge ProfileSquare Edge
- Milling ProfileTongue & Groove
- Kiln Dried Yes
- Installation MethodsNail or Staple Down
Description
This 6" Walnut #2 Common grade will have plenty of knots and character along with all of the natural color and grain variations commonly seen in this species. Some natural defects are admitted along with possible machine defects. Ordering a higher percentage than normal may be required depending on customers intended use or character tolerance. For customers desiring longer boards or higher board length average please see higher grades. Our 3/4" thick unfinished solid wood flooring is milled by NWFA standards.
Coverage Needed:
Flooring Total: $0.00
Shipping Cost: $0.00
Total: $0.00
ACCESSORIES
Please view the matching accessories for your new flooring. | FREE SHIPPING on all Transition Pieces & Underlayment with flooring order.
Stair Treads and Risers
| Image | Description | Select Options | Price | QTY | Action |
|---|---|---|---|---|---|
 |
Stair Treads "Walnut" - Dimensions are 1" thick and 11 1/2" deep with bull nose on front edge. Select lengths and return(s) if needed. Returns are required when the stair case is open on the left or right. At the bottom looking up, if it is open on the left side, treads will need a left return. Call for custom sizes. |
$84.00- $305.00 | |||
 |
Stair Risers "Walnut" - Dimensions are 3/4" thick and 7 1/2" tall. Length selections from 36" to 94". Covers the vertical space between steps. Call for custom sizes. |
$48.00- $145.00 |
Transitions
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 |
Quarter Round Walnut Unfinished | 94" Long Piece – Quarter Round trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $19.80 | ||
 |
Shoe Molding Walnut Unfinished | 94" Long Piece – Shoe Molding trims where flooring meets baseboard, cabinetry or other vertical surfaces. | $19.50 | ||
 |
Cove Molding Walnut Unfinished | 84" Long Piece – Cove molding is used to trim the seam where a stair tread and riser meet. | $19.50 | ||
 |
T-molding Walnut Unfinished | 78" Long Piece – T-molding transitions to another hard surface floor of the same or similar height such as tile or marble. | $49.00 | ||
 |
Threshold Walnut Unfinished | 78" Long Piece – Threshold transitions to carpet or exterior doors such as front, rear or garage entry doors, sliding glass doors and french doors. | $49.00 | ||
 |
Reducer Walnut Unfinished | 78" Long Piece – Reducer transitions to subfloor or thinner floors such as linoleum or vinyl. | $39.00 | ||
 |
3 1/2" Stair Nose Walnut Unfinished | 3 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $64.00 | ||
 |
5 1/2" Stair Nose Walnut Unfinished | 5 ½" Wide x 78" Long Piece – Stair Nosing is used whenever there is a step down, stair landing, balcony or can be used in place of stair treads. | $84.00 |
Installation Accessories
| Image | Name | Description | Price | QTY | Action |
|---|---|---|---|---|---|
 |
Multi-purpose Floor Protector | 150 Square Foot Roll - can be used on all types of flooring including: hardwood, vinyl, carpet, tile, stairs or even countertops. Heavy duty, non-slip, non-tear and re-useable at least 3 more times. Ideal to protect your flooring during remodeling or new construction. Includes a breathable, waterproof polyester film. Light adhesive backing makes sure it stays in place on those busy jobsites. |
$49.00 | ||
 |
Silicone Vapor Shield - Moisture Retarder | 200 Square Foot Roll - Necessary for installation of staple or nail down floors. Meets NWFA requirements for moisture retarder. Prevents squeaking and allows planks to slide easily for installation. | $39.00 |